• 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EtherCAT slave configuration?
#1
Hi

How can I configure the netHAT to work as an EtherCAT slave with the netPI device?
  Reply
#2
Hi,

netHAT and netPI are two different devices.

netHAT is a product for all those who are interested in evaluate real-time ethernet connectivity.
There are three firmware packages available.
  1. EtherCAT Slave
  2. EtherNet/IP Adapter
  3. PROFINET IO Device
The driver that comes with netHAT in the download section here https://www.netiot.com/interface/nethat/ configures the module always to fix 32 bytes input and output.
To configure the netHAT to work as an EtherCAT Slave you have to follow the steps:
  1. Install the driver and firmware packages
  2. Configure your EtherCAT master
  3. Start the cifxsample to test I/O data
If you have any further questions based on the netPI, please use the netPI Forum.

Thanks,
Simon
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ethercat Master TwinCATversion? MGharat 1 8 September-19th-2019, 06:38 AM
Last Post: Armin@netPI
  Problem with NetHAT Configuration adeeljsid 2 194 July-5th-2018, 12:10 PM
Last Post: Simon@netHAT

Forum Jump:


Users browsing this thread: 1 Guest(s)