• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dual RS485 Ports
#1
Are you able to produce a bespoke version of the RS485 expansion module which provides 2 x RS485 communications ports?
  Reply
#2
Hello primmer,

I am sorry to say that the Raspberry CPU BCM2837 does not have any UART left to drive 2 ports physically. So this is not possible to realized.

We have a customer that successfully used this device here for multiple RS485 connections: https://www.reichelt.de/raspberry-pi-usb...42783.html

This is the only possibility I see right now for you.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
(September-25th-2019, 09:30 AM)Armin@netPI Wrote: Hello primmer,

I am sorry to say that the Raspberry CPU BCM2837 does not have any UART left to drive 2 ports physically. So this is not possible to realized.

We have a customer that successfully used this device here for multiple RS485 connections: https://www.reichelt.de/raspberry-pi-usb...42783.html

This is the only possibility I see right now for you.

Thx
Armin

OK, thanks for the prompt response.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  NPIX-RS485 with auto direction control now available Armin@netPI 11 7,916 May-15th-2020, 10:46 PM
Last Post: EnergyKonnex
  Problems with the communication of the RS485 interface PeterL. 9 6,236 April-28th-2020, 02:53 PM
Last Post: Armin@netPI
  connecting Mitsubishi via RS485 COswald 11 7,843 January-14th-2020, 10:58 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)