• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Custom NPIX modules
NPIX modules tailored to your requirements, in which your ideas can add to the basic functions of netPI, is a service we offer.

What you need are three things:
  •    A PCBA
  •    A metal bracket
  •    Some screws

There are two options how to come to an own NPIX module:
  •    You share your idea with us. We make the design and take care of the whole production on a bid basis.
  •    You take care of the design. We share with you the bracket manufacturer. You do the production yourself.

For your design you find the NPIX connector pinout in the topic "netPI schematics" and the board outline under forum topic "NPIX board outline". Also you find the user manual of the Hilscher designed NPIX modules in the "downloads" section at https://www.netiot.com/netpi/.

Next to certain 3,3V, 5V, 24V and GND signals the remaining 36 pins of the NPIX connector are connecting to either the Raspberry Broadcom CPU BCM2837 or the netX Industrial Network Controller (available on netPI RTE 3 only). Roughly one half of the pins connects to the BCM, the other to netX. With those connecting to BCM we set the focus on certain pins. Connected are a UART, an I2C, an SPI and some GPIOs. Keep in mind that the BCM SPI0 interface is not available cause it is used for communications between the BCM and netX CPU.

Tell us about your project and we will come together to a solution. Mail your idea/concept to netpi@hilscher.com
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)


Possibly Related Threads...
Thread Author Replies Views Last Post
  Designing own NPIX extension modules Armin@netPI 0 10 September-12th-2019, 11:54 AM
Last Post: Armin@netPI
  NPIX-RS485 with auto direction control now available Armin@netPI 0 14 August-26th-2019, 07:18 AM
Last Post: Armin@netPI
  NIOT-E-NPIX-RCAN availability andreash 4 18 April-26th-2019, 01:25 PM
Last Post: Armin@netPI
  [SOLVED] NPIX-4DI4DO Module clogomes 1 13 April-15th-2019, 12:39 PM
Last Post: Armin@netPI
  NPIX board outline Armin@netPI 2 162 April-25th-2018, 06:40 PM
Last Post: Armin@netPI

Forum Jump:

Users browsing this thread: 1 Guest(s)