• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Creating a container
#1
Exclamation 
I have been trying to create a container for the last hour but I keep getting the same error. 
Can anyone assist me or tell me what I might have done wrong.

I tried to pull the Image in general but could not work either.


Attached Files Thumbnail(s)
   
  Reply
#2
It seems your netPI requests from Docker can’t reach the Docker Hub web site. Are you behind a firewall maybe?
How about the NTP time setting in the system menu of netPI? Does your netPI get the system time? Just for a short test.
Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
(March-5th-2020, 01:45 PM)Armin@netPI Wrote: It seems your netPI requests from Docker can’t reach the Docker Hub web site. Are you behind a firewall maybe?
How about the NTP time setting in the system menu of netPI? Does your netPI get the system time? Just for a short test.
Thx
Armin

Time is setup as normal.
Connected to wifi, tried changing many settings and have a new current error


Attached Files Thumbnail(s)
       
  Reply
#4
Please pay attention if you have configured WiFi and LAN the same time. If both connections have a gateway configured it will never work. If WiFi is your primary network then remove gateway address in LAN setup, else Linux does not know where to route the internet data to
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#5
(March-5th-2020, 06:55 PM)Armin@netPI Wrote: Please pay attention if you have configured WiFi and LAN the same time. If both connections have a gateway configured it will never work. If WiFi is your primary network then remove gateway address in LAN setup, else Linux does not know where to route the internet data to

It is only connected through LAN. but still the same error occurs.


Attached Files Thumbnail(s)
   
  Reply
#6
(March-5th-2020, 08:09 PM)Linnerz Wrote:
(March-5th-2020, 06:55 PM)Armin@netPI Wrote: Please pay attention if you have configured WiFi and LAN the same time. If both connections have a gateway configured it will never work. If WiFi is your primary network then remove gateway address in LAN setup, else Linux does not know where to route the internet data to

It is only connected through LAN. but still the same error occurs.

I think the problem is with the Docker service on the control panel. I searched that all steps were done correctly but I have this message under service.


Attached Files Thumbnail(s)
   
  Reply
#7
No there is something wrong with your internet connection. Did you try just to use LAN interface first without the use of WiFi. Maybe you have a standard raspberry pi to compare. Then you could install Docker manually under Raspbian OS and call a Docker pull command of your container to check internet presence and if the port is open to Docker Hub. Are you in a home network or in a office network?
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  TOSILOCK for CONTAINER COswald 3 2,183 July-13th-2021, 11:32 AM
Last Post: Armin@netPI
  Access to RTC from my own container application tad 1 3,520 March-19th-2021, 02:58 PM
Last Post: Armin@netPI
  [SOLVED] Starting services/commands/scripts at startup of a container Jonas.Sellmann@outlook.de 9 6,014 March-9th-2021, 08:47 AM
Last Post: WalterSchaefer
  OpenVPN container Armin@netPI 0 1,614 January-3rd-2021, 12:13 PM
Last Post: Armin@netPI
  operating Console of a container on netPI connected to Wi-Fi tethering tad 3 2,611 December-3rd-2020, 12:32 PM
Last Post: tad
  NIOT-E-NPIX-4DI4DO with netpi-netx container WalterSchaefer 3 6,475 November-25th-2020, 01:06 PM
Last Post: zen89
  NPIX-4DI4DO and NetPi-Nodered container issues alhammi 4 7,583 November-16th-2020, 01:35 PM
Last Post: alhammi
  Get host MAC via REST API inside container bschandra 4 3,640 November-16th-2020, 09:26 AM
Last Post: bschandra
  Exporting and importing container images Armin@netPI 3 3,064 May-20th-2020, 11:24 AM
Last Post: COswald
  [SOLVED] activate LED1/2 with Node-RED + fieldbus nodes container Christian_Rau 6 4,659 October-21st-2019, 10:30 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)